Dissimilar Welding of Magnesium Alloys and Aluminum Alloys by Explosive Welding

Mami Mihara-Narita, Konosuke Asai, Hisashi Sato, Yoshimi Watanabe, Isao Nakatsugawa, Naobumi Saito, Yasumasa Chino (2025) Dissimilar Welding of Magnesium Alloys and Aluminum Alloys by Explosive Welding Materials (Basel) (IF: 3) 18(5)

Abstract

Welding of dissimilar magnesium alloys and aluminum alloys is challenging due to the formation of interlayers composed of brittle intermetallic compounds (IMCs) at the bonding interface, which reduces the bonding strength. In our studies, we applied explosive welding to facilitate dissimilar welding of magnesium alloys and aluminum alloys. This method utilized a high-speed impact from an explosive to bond magnesium alloys and aluminum alloys in a short time, effectively suppressing the formation of the interlayer. Our research confirmed the presence of a thin interlayer of the γ-Mg17Al12 phase at the interface of the cladding plates. The alloy compositions of both magnesium alloys and aluminum alloys influenced the thickness of this interlayer. Furthermore, annealing of the cladding plates increased the thickness of the interlayer, resulting in the formation of the aluminum-rich β-Al3Mg2 phase on the aluminum alloy side after annealing at 473 K. The formation of the brittle β-Al3Mg2 phase led to crack initiation, which reduced the shear strength. In terms of corrosion resistance, the corrosion weight loss of the explosively welded cladding plates was slightly less than that of mechanically fastened samples. Therefore, it can be concluded that explosive welding is highly effective for bonding magnesium alloys to aluminum alloys.

Links

http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11900963
http://www.ncbi.nlm.nih.gov/pubmed/40077237
http://dx.doi.org/10.3390/ma18051013

Similar articles

Tools

Export to RIS